搜索结果: 1-15 共查到“工学 wear”相关记录67条 . 查询时间(0.093 秒)
Welcome to the 21st International Conference on Wear of Materials, which will take place in California, USA from the 26-30 March 2017.The conference will focus on both the fundamental and applied aspe...
CMOS feature size scaling has been a source of dramatic performance gains, but it has come at a cost of on-chip wear-out. Negative Bias Temperature Instability (NBTI) is one of the main on-chip wear-o...
Effect of heat treatment on the microstructure, hardness and abrasive wear resistance of high chromium hardfacing
destabilized austenite carbide dry rubber wheel test factorial regression GMAW toughness
2014/2/24
The effect of destabilization heat treatment on the microstructure, hardness, fracture toughness and abrasive wear
resistance of high chromium hardfacing was investigated. The results from the study...
A shock and wear system under environmental conditions subject to internal failures, repair, and replacement
Markovian arrival process Phase-type distribution Replacement Imperfect repairAbstract
2012/4/22
A system in a random environment is considered. The influence of the external conditions is governed by a Markovian arrival process. The internal structure of failure and repair are governed by phase-...
Abrasive Wear Mechanisms of Sand Particles Intruding into ATM Roller-Scraper Tribosystem
Tribosystem Abrasive Wear Mechanism
2011/8/4
The roller-scraper tribosystem of Automatic Teller Machine (ATM) plays an important role in reliable cash requests. However, the abrasive wear of the polymer tribosystem becomes a prominent problem wh...
基于侧向变刚度的轮胎多边形磨损机理分析（Mechanism of Polygonal Wear of Tire Based on Variable Stiffness of Lateral）
车辆 轮胎 多边形磨损 变刚度 机理
2010/12/29
考虑轮胎接地摩擦的非线性特性，建立了基于侧向变刚度的轮胎多边形磨损模型，并对系统的稳定性进行了分析，指出轮胎的自激振动是一种由系统Hopf分岔引起的稳定周期振动现象，通过数值仿真得到了引起胎面自激振动的车速和车轮前束角范围。结果表明：轮胎多边形磨损为一种典型的非线性自激振动现象，其发生与胎面的侧向振动有关，磨损边数近似等于胎面的侧向振动频率与车轮转动频率之比。所建模型能够很好地解释轮胎多边形磨损的...
Wear of plasma nitrided and nitrocarburised AISI 316L austenitic stainless steel
Wear of plasma nitrided nitrocarburised AISI 316L stainless steel
2010/8/12
The use of coatings and surface engineered components is increasing and is driven by the need for improved hardness, corrosion and wear resistance [1]. Austenitic stainless steels are the most importa...
The application of statistical models in wear resistance simulations of Al-Al2O3 composites
Composites Infiltration Simulation Statistical models
2010/8/17
Currently, the most widespread use have found the composite materials with the light metals matrix, and especially from the aluminium alloys, reinforced with the ceramic particles or fibres that can b...
The technique of depositing of the hard and thin coatings is one of the most spectacular aspect of the materials engineering development in the last years. The physical vapour deposition (PVD) method ...
Influence of overlay layers on the abrasive wear
abrasive wear abrasive particle overlay materials functional surfaces abrasive cloth
2014/2/26
A problem of machine parts wear decrease and in this way of the economical effectiveness of rapid wearable parts interferes with majority of manufacturing processes. Service life and operating reliabi...
激光微造型凸轮副的摩擦磨损（Friction and Wear of Cam with Laser Micro-texture under Lubrication）
凸轮 激光微造型 几何形貌
2010/1/28
采用UMT-2多功能摩擦磨损实验机，模拟内燃机凸轮/滚轮工况条件，考察了多种激光微造型形貌试样表面的摩擦磨损特性。实验结果发现，与未处理光滑表面相比，激光微造型试样表面的耐磨、抗擦伤性显著提高，其中，凹坑造型表面的摩擦因数显著下降，而凹槽表面的摩擦因数相对较大。这说明凹槽形貌会增大表面摩擦，而凹坑形貌具有一定的减摩效果。合理选择凹坑的深度及其面积占有率，并进行微形貌几何参数的优化组合，可达到最佳减...
高速车削铁基高温合金硬质合金刀具磨损机理（Wear Mechanism of Cemented Carbide Tool in High Speed Machining Iron-based Superalloy GH2132）
刀具 高温合金 高速车削
2009/12/28
使用4种硬质合金涂层和非涂层刀具材料进行铁基高温合金GH2132的高速干车削试验，采用电子扫描显微镜（SEM）观察刀具的磨损形貌，通过能谱分析（EDS）分析磨损表面的元素分布，并对刀具的主要磨损机理进行分析。研究结果表明，使用硬质合金刀具材料高速干车削铁基高温合金GH2132时，刀具的磨损机理主要为粘结磨损、扩散磨损、氧化磨损并伴有少量的微崩刃。高速切削时刀具的前刀面磨损形态不同于常速切削时的磨损...
Experimental investigation of effects of external loads on erosive wear
Erosive wear Yield strength Impingement angle
2009/12/14
Purpose: The purpose of the paper is to investigate effects of external loads on erosive wear.
Design/methodology/approach: In this experimental study, specimens were placed on specially designed a s...
Investigation of the life-time of drills covered with the anti-wear Cr(C,N) complex coatings, deposited by means of Arc-PVD technique
Cr(N,C) coatings Arc-PVD Drilling test
2009/12/14
Purpose: This research was done to study the tribological behavior of twist HS6-5-2 drills covered with Cr/CrN/CrN+Cr2N/Cr(C, N) and Cr/CrN/ Cr(C, N) coatings as well as to obtain detailed information...
Tool flank wear analyses on martensitic stainless steel by turning
Machining Wear resistance Flank wear
2009/12/2
Purpose: Purpose of this research was to demonstrate tool wear by hard turning of martensitic stainless steel and
this material is pronounced as difficult to machine material. The evaluation was done...