搜索结果: 1-15 共查到“口腔医学 Base”相关记录56条 . 查询时间(0.08 秒)
Historical interest of denture base materials.
Transverse Strength of Repaired Denture Base Material with Wire and Two Auto Polymerized Acrylic Resin
Acrylic Resins Dental Stress Analysis Denture Repair Denture Bases Methylmethacrylate Orthodontic Wires
2009/12/9
Objective:
The purpose of this study was to evaluate the transverse strength of one brand of denture base material repaired with two autopolymerized acrylic resins with and without wire reinforcement...
Evaluation of Antibacterial and Fluoride-releasing Adhesive System on Dentin — Microtensile Bond Strength and Acid-base Challenge
Adhesive system Dentin Fluoride-releasing material
2009/9/14
This study evaluated the influence of a fluoride-containing adhesive on microtensile bond strength (μTBS) to dentin, as well as analyzed the dentin-adhesive interface after acid-base challenge. Experi...
Influence of Polishing of Denture Base Resin and Metal Surfaces on Wettability with Water and Saliva
Denture base materials Surface roughness Contact angle
2009/9/14
The purpose of this study was to investigate the influence of the surface roughness of denture base resin and metal on wettability with water and saliva.
Solid specimens were produced using heat-curi...
Effect of Adhesive Primer Developed Exclusively for Heat-curing Resin on Adhesive Strength between Plastic Artificial Tooth and Acrylic Denture Base Resin
Adhesive primer Adhesion Artificial tooth
2009/9/14
Despite progress in the development of denture base resin and artificial tooth materials, dental clinics are still plagued with artificial teeth falling off the denture base - due to poor bond strengt...
Reinforcement of Denture Base Resin with Short-rod Glass Fiber
Short-rod glass fiber Flexural properties Denture base resin
2009/9/14
The present study investigated the feasibility of a high short-rod fiber content in denture base resins using polymethylmethacrylate (PMMA) powder with a small particle diameter. The effects of fiber ...
Shear Bond Strength and FEM of a Resin-modified Glass Ionomer Cement—Effects of Tooth Enamel Shape and Orthodontic Bracket Base Configuration
Resin-modified glass ionomer cement Bond strength FEM
2009/9/14
The objective of this study was to evaluate the influences of enamel shape and bracket base configuration on shear bond strength from a biomechanical point of view. To this end, shear bond test and st...
The Effect of Esthetic Fibers on Impact Resistance of a Conventional Heat-cured Denture Base Resin
Fibers Impact Acrylic
2009/9/14
This study was conducted to observe the changes in impact resistance of a denture base resin reinforced with five types of fiber. E-glass, polyester, rayon, nylon 6, and nylon 6/6 fibers were cut into...
Effect of Degradation of Denture Base Resin on Bond Strength to Relining Resins
Denture base resin Relining resin Bond strength
2009/9/14
The purpose of this study was to evaluate the effect of degradation of a denture base resin on bond strength to relining resins. Denture base resin specimens were immersed under various conditions to ...
In vitro Comparison of Autoclave Polymerization on the Transverse Strength of Denture Base Resins
Denture base resins Polymerization Autoclave
2009/9/11
The aim of this study was to determine the effect of autoclave polymerization on the transverse strength of denture base polymers. To this end, 30 rectangular test specimens were fabricated of two hea...
Basic Study on the Application of Novel Functional Monomers to a Denture Base Resin
Functional monomer Polymerization Mechanical Property
2009/9/11
To improve the mechanical properties and to reduce the water sorption amount of denture base resins, the polymerization characteristics of three novel fluoro-substituted monomers (MAF-TBN, MAF-MAE, MA...
Self-cleaning Ability of a Photocatalyst-containing Denture Base Material
Decomposition ability Denture base material Photocatalyst
2009/9/11
This study examined the ability of a photocatalyst mixed in a denture base resin to decompose organic substances which adhered to the denture base resin surface. The photocatalyst was mixed with dentu...
Evaluation of dentin bonding performance and acid-base resistance of the interface of two-step self-etching adhesive systems
Acid-base resistant zone Dentin bonding Self-etching primer system
2009/9/11
The purpose of this study was to evaluate dentin bond strengths and to observe the adhesive-dentin interface after acid-base challenge using fluoride-free and fluoride-releasing self-etching adhesive ...
Influence of methylmercaptan on the bonding strength of autopolymerizing reline resins to a heat-polymerized denture base resin
Hard reline resin Methylmercaptan Shear bond strength
2009/9/11
Effects of methylmercaptan solution (MS), a volatile sulfur compound produced by gram-negative oral microorganisms, on the adhesion of reline denture resins were investigated. For this purpose, a tota...
Bonding strength of autopolymerizing resin to nylon denture base polymer
Nylon denture Silica coating Bonding strength
2009/9/11
This study aimed to investigate the shear bond strength of an autopolymerizing resin to a nylon denture base polymer (Lucitone FRS: LT) subjected to different surface treatments, and the results there...