搜索结果: 1-12 共查到“材料科学 characterisation”相关记录12条 . 查询时间(0.066 秒)
第八届计算方法和材料表征实验国际会议（8th International Conference on Computational Methods and Experiments in Material Characterisation）
第八届 计算方法和材料表征实验 国际会议
2017/1/10
The aim of the conference is to facilitate interaction between the research and industrial community and discuss the latest developments in this rapidly advancing field. The meeting responds to the de...
Characterisation of nanostructured copper - WC materials
Nanostructure Cu-WC micro-composite Dispersion hardening
2009/12/14
Purpose: The aim of this work was to determine the microstructure and properties stability of nanocrystalline copper dispersion hardened with nanoparticles of tungsten carbides.
Design/methodology/ap...
Magnetorheological characterisation of carbonyl iron based suspension
Smart materials Magnetorheological materials Carbonyl iron
2009/12/14
Purpose: The main aim of this article was to present the investigation results of magnetorheological fluids (MR) composed of carbonyl iron (CI) particles and analyse their flow behaviour in terms of t...
The application of transient thermography for the thermal characterisation of carbon fibre/epoxy composites
Non-destructive testing Transient thermography Thermal diffusivity
2009/12/14
Purpose: Primary purpose of the present experimental study was to evaluate the local fibre content in carbon fibre/epoxy composites using transient thermography.
Design/methodology/approach: The expe...
Characterisation of APS TBC system during isothermal oxidation at 1100°C
Silesian University of Technology WSK “PZL Rzeszów”
2009/12/1
Purpose: The purpose of presented investigations was metallographical characterization of failure modes of air
plasma sprayed thermal barrier coatings system in isothermal oxidation test conditions a...
Surface layer characterisation of bearing rings
Surface layers Bearing rings Retained austenite
2009/12/1
Purpose: The X-ray quantitative phase analysis was used to establish volume fraction of transformed retained
austenite. Theoretical calculation of residual macro-stresses due to volume fraction of tr...
Characterisation of properties and microstructural changes of 12% Cr-W steels after long-term service
Residual life analysis Electron microscopy Metallic alloys
2010/1/19
Purpose: Characterization of the influence of long-term exposition on microstructural stability and properties
of new modified ferritic steels containing 12% Cr with W addition.
Design/methodology/a...
Microstructural characterisation of EN AW6061 alloy matrix composites with Ti3Al intermetallics reinforcement
Mechanical alloying Aluminium matrix composites Intermetallics
2010/1/19
Purpose: The main aim of this work is to investigate microstructure of EN AW6061 matrix composites with
Ti3Al intermetallics reinforcement produced by powder metallurgy techniques and hot extrusion.
...
Processing and characterisation of particulate reinforced aluminium silicon matrix composite
Mechanical properties Quartz particulate LM6 alloy
2010/2/9
Purpose: This paper describes and discusses the processing and characterization of quartz particulate reinforced aluminium-silicon alloy matrix composite.Design/methodology/approach: In this regard, q...
Characterisation of air plasma sprayed TBC coating during isothermal oxidation at 1100°C
Thin & thick coatings TBC Degradation Oxidation
2010/2/22
Purpose: The purpose of the research was characterization of failure modes of air plasma sprayed thermal barrier coatings system in isthermal oxidation test conditions at 1100ºC.
Design/methodol...
Oxford Materials Characterisation Services（OMCS）
OMCS Oxford Materials Characterisation Services 材料学
2007/12/24
OMCS was established in October 2002 as a point of contact for those wishing to access facilities and expertise within the Department of Materials. These facilities have been augmented recently with a...
Characterisation of TiCxOy thin films produced by PVD techniques
Mechanical properties Multifunctional materials Ti-C-O Structure
2010/2/22
Purpose: The purpose of this work consists in the characterisation of TiCxOy thin films produced by dc reactive magnetron sputtering. The main goal consists in studying the influence of the reactive g...